VNU-UET Repository: No conditions. Results ordered -Date Deposited. 2024-03-29T13:49:40ZEPrintshttp://eprints.uet.vnu.edu.vn/images/sitelogo.pnghttps://eprints.uet.vnu.edu.vn/eprints/2020-11-30T07:04:33Z2020-11-30T07:04:33Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/4094This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/40942020-11-30T07:04:33ZQuy trình chế tạo mặt nạ kim loại sử dụng máy khắc Laze Fiber thương mại, ứng dụng trong kỹ thuật phún xạ để chế tạo các chi tiết có kích thước cỡ mili-métAnh Tam Hohoanhtam@vnu.edu.vnThi Huong Giang Dogiangdth@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnKhac Quynh Le2020-11-30T07:04:27Z2020-11-30T07:04:27Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/4092This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/40922020-11-30T07:04:27ZBộ phận dẫn tập trung và khuếch đại từ thông dạng vành khuyên và hệ thống tích hợpSáng chế đề cập tới mạch dẫn, tập trung từ thông có dạng hình vành khuyên (1) có kết cấu bao gồm: giới hạn bởi 2 hai đường tròn có đường kính ngoài là D_ng và và đường kính trong là D_tr bố trí lệch tâm tạo thành 2 phần không đối xứng với một bên dày hơn có độ rộng w và một bên mỏng hơn có độ rộng s. Trên đường kính là trục đối xứng của hai vòng tròn này có khoét một lỗ 4 có đường kính h nằm ở bên phía ra dày hơn của mạch dẫn này. Lỗ khoét này chính là vị trí kênh dẫn vi lưu để dẫn hạt từ 2 chạy xuyên qua. Phía bên kia của mạch dẫn tại vị trí mỏng nhất, một khe hở 5 có độ rộng g và chiều ngang là s được tạo ra ra để để đặt cảm biến 3 vào chính giữa phần không gian khe hở này. Khoảng cách từ tâm hạt từ đến tâm cảm biến là L và độ dày của tấm này là t. Các kích thước này đã được tính toán và lựa chọn tối ưu cho từ trường tập trung mạnh nhất.
Hệ thống tích hợp bao gồm kênh dẫn vi lưu cảm biến ừ và mạch dẫn tập trung và khuếch đại từ thông hình vành khuyên có kết cấu bao gồm: mạch dẫn và tập trung từ thông 1 như mô tả trong khía cạnh thứ nhất nhất của sáng chế này, cảm biến đo từ trường 3 có kích thước tương thích với kích thước của hạt từ 2 cần dò tìm có sẵn các điện cực 7, hệ thống kênh dẫn vi lưu 6 dẫn chất lỏng có chứa các hạt hát từ tính chạy xuyên qua lỗ 4 trên mạch dẫn tập trung từ thông 1 được thực hiện ở khía cạnh thứ nhất của sáng chế này.Anh Tam Hohoanhtam@vnu.edu.vnThi Huong Giang Dogiangdth@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnAnh Tuan PhungViet Hung Nguyenviethung1996vn@gmail.com2020-11-30T07:04:13Z2020-11-30T07:04:13Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/4091This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/40912020-11-30T07:04:13ZLINH KIỆN CẢM BIẾN ĐO TỪ TRƯỜNG 3 TRỤC VÀ PHƯƠNG PHÁP CHẾ TẠO LINH KIỆN NÀY, THIẾT BỊ ĐO TỪ TRƯỜNG TRÁI ĐẤT ĐIỆN TỬ TÍCH HỢP VỚI HỆ THỐNG ĐỊNH VỊ GPS VÀ TRUYỀN PHÁT KHÔNG DÂY PHỤC VỤ KHẢO SÁT, THĂM DÒ VÀ VẼ BẢN ĐỒ TỪ TRƯỜNG CÓ LINH KIỆN CẢM BIẾN NÀYSáng chế là tạo ra linh kiện cảm biến đơn trục cho phép đo và xác định thành phần từ trường dọc theo trục cảm biến cả về cường độ và dấu (cùng hướng hay ngược hướng của trục cảm biến). Đây là bộ phận cảm biến hoạt động dựa trên hiệu ứng tổ hợp từ điện có độ nhạy, độ phân giải cao, độ ổn định và lặp lại cao nhờ sử dụng vật liệu với cấu hình thiết kế phù và chế tạo phù hợp. Mục đích khác của sáng chế là chế tạo linh kiện cảm biến 3 trục 18 có kết cấu bao gồm 3 linh kiện cảm biến đơn trục 1 ở trên được bố trí theo 3 cạnh vuông góc không chung đỉnh với nhau trong một hình hộp lập phương. Mục đích khác của sáng chế là đề xuất thiết bị điện tử đo từ trường trái đất có kết cấu bao gồm linh kiện cảm biến 3 trục 18 ở trên kết nối với mạch điện tử có chức năng đo lường và xử lý tín hiệu số và hệ thống cảm biến chuyển động. Mục đích khác của sáng chế là tạo ra hệ thống đo và vẽ từ trường trái đất có sử dụng thiết bị điện tử đo từ trường trái đất 3 trục ở trên tích hợp với hệ thống định vị GPS và hệ thống truyền phát không dây đáp ứng yêu cầu của thiết bị với độ phân giải từ trường 0.1 nT tuyến tính trong toàn dải đo từ -120.000 đến 120.000 nT và độ phân giải góc 10-1 độ. Hệ thống cho phép định vị vị trí trong không gian với độ chính xác cỡ 3 m và truyền phát không dây trong bán kính lên đến 8 km.Thi Huong Giang Dogiangdth@vnu.edu.vnAnh Tam Hohoanhtam@vnu.edu.vnViet Hung Nguyenviethung1996vn@gmail.comThi Ngoc NguyenHuu Duc Nguyenducnh@vnu.edu.vnAnh Tuan PhungDinh Cuong TrinhDinh Duong DoBa Bien Nguyen2020-11-30T07:03:47Z2020-11-30T07:03:47Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/4089This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/40892020-11-30T07:03:47ZGiant magnetoelectric effects in serial-parallel connected Metglas/PZT arrays with magnetostrictively homogeneous laminatesTo ensure the magnetostrictive softness, the homogeneity, the decrease of the shear-lag effect and the
space-saving construction of narrowed longitudinal-transverse L-T magnetoelectric (ME) composites, a
novel parallel-connected-multi-bars (PCMB) geometry of PZT/Metglas is proposed and investigated by
simulation and experiment. In this case, Metglas layers are structured in different geometries from the
conventional single bar (c-SB) to conventional separated multiple bars (c-SMB), elongated separate
multi-bar (e-SMB) and n-magnetic-bar based PCMB (n-PCMB). This n-PCMB geometry divides the conventional
ME configuration into n parallel-connected ME units (n-PCMEU) according to the magnetic
geometries. The optimal ME performance with the largest ME voltage coefficient aE of 630 V/cm.Oe is
achieved in PCMEU with two Metglas bars (n = 2). The ME voltage coefficient can be further enhanced by
integrating m of these optimal PCMEUs in series to form a serial-parallel ME unit array m-S (n-PMEU)A.
The aE value increases by a factor of 3.6 and reaches 2.238 kV/cm.Oe for 4-S (2-PMEU)A, a factor that is
almost equal to m. The resulting 4-S (2-PMEU)A sensor possesses an extremely high sensitivity of
18.1 mV/nT, with a resolution of 10�1 nT.Dinh Cuong TrinhViet Hung Nguyenviethung1996vn@gmail.comLe Ha VuAnh Tuan PhungDinh Duong DoAnh Tam Hohoanhtam@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnThi Huong Giang Dogiangdth@vnu.edu.vn2020-11-30T07:03:26Z2020-11-30T07:03:26Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/4088This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/40882020-11-30T07:03:26ZMagnetoelectric Vortex Magnetic Field Sensors Based
on the Metglas/PZT LaminatesThis paper describes the route, from simulations toward experiments, for optimizing the
magnetoelectric (ME) geometries for vortex magnetic field sensors. The research is performed on the
base of the Metglas/Piezoelectric (PZT) laminates in both open and closed magnetic circuit (OMC and
CMC) geometries with di�erent widths (W), lengths (L), and diameters (D). Among these geometries,
the CMC laminates demonstrate advantages not only in their magnetic flux distribution, but also in
their sensitivity and in their independence of the position of the vortex center. In addition, the ME
voltage signal is found to be enhanced by increasing the magnetostrictive volume fraction. Optimal
issues are incorporated to realize a CMC-based ME double sandwich current sensor in the ring shape
with D � W = 6 mm � 1.5 mm and four layers of Metglas. At the resonant frequency of 174.4 kHz,
this sensor exhibits the record sensitivity of 5.426 V/A as compared to variety of devices such as the
CMC ME sensor family, fluxgate, magnetoresistive, and Hall-e�ect-based devices. It opens a potential
to commercialize a new generation of ME-based current and (or) vortex magnetic sensors.Thi Huong Giang Dogiangdth@vnu.edu.vnAnh Tam Hohoanhtam@vnu.edu.vnThi Ngoc Khanh VuTrong Vinh NguyenAnh Tuan PhungVan Tuan NguyenThi Ngoc NguyenHuu Duc Nguyenducnh@vnu.edu.vn2019-12-06T11:47:07Z2019-12-06T11:47:07Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3627This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/36272019-12-06T11:47:07ZQuy trình chế tạo kênh dẫn vi lưu sử dụng laze CO2 kết hợp với cơ cấu quét chùm tia bằng đầu lắc Galvo và đóng kín kênh bằng cách ép cơ họcAnh Tam Hohoanhtam@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnThi Huong Giang Dogiangdth@vnu.edu.vnViet Hung Nguyenviethung1996vn@gmail.com2019-12-04T03:58:16Z2019-12-04T03:58:16Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3628This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/36282019-12-04T03:58:16ZPhương pháp tự động dò tìm và bắt bám vệ tinh địa tĩnh ứng dụng cho các trạm thu di động tín hiệu vệ tinh đặt trên các phương tiện di chuyểnAnh Tam Hohoanhtam@vnu.edu.vnThi Huong Giang Dogiangdth@vnu.edu.vnVan Muoi DangDinh Van NguyenHuu Duc Nguyenducnh@vnu.edu.vn2019-11-29T03:43:50Z2019-11-29T03:43:50Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3626This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/36262019-11-29T03:43:50ZLinh kiện cảm biến đo dòng điện và phương pháp chế tạoThi Huong Giang Dogiangdth@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnAnh Tam Hohoanhtam@vnu.edu.vn2019-06-20T22:39:58Z2019-06-24T06:45:55Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3515This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/35152019-06-20T22:39:58ZDesign, simulation and fabrication of a high sensitivity micro-magnetometer integrated with microfluidics system and flux concentrators for biomedical applicationsBiomagnetism is the phenomenon of magnetic fields emitted by living organisms including cells. Magnetic field strength produced by cells or even with cells marked by magnetism (called biomarkers) are generally very weak. For this reason, cells/biomarkers (bio-samples) detection usually were done by directly contacting the bio-samples with sensor surface that would cause to degradation of sensor performance after some measurements. To deal with such situation, using an annular-shaped flux concentrator made by a high magnetic permeability material to increase magnetic amplification in sensor’s surface is necessary. Beside, this solution also supports for the measurement without contact. In this paper, we describes the results in design, simulation and fabrication of a high sensitivity micro-magnetometer integrated with microfluidics system and flux concentrators for biomedical applications (Fig. 1a). From simulation toward experiment, the results showed that by using the optimal annular-shaped flux concentrator to focus flux lines on sensor’s surface, the sensor signals is more than ten times higher than in the case directly contact method (Fig. 1b). The system opens up the potential for widespread use in lab-on-a-chip for biomedical applications and commercializationAnh Tam Hohoanhtam@vnu.edu.vnVan Hung NguyenThi Huong Giang Dogiangdth@vnu.edu.vnHuu Duc Nguyenducnh@vnu.edu.vnKim CheoGi2019-06-20T22:39:00Z2019-06-24T06:46:49Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3513This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/35132019-06-20T22:39:00ZClosed magnetic circuit magnetoelectric composites for extremely high sensitivity and electromechanical resonances controllable current sensorMany assiduous researches have been taken into account by improving the increasing the soft intrinsic magnetic susceptibility of ribbon ferromagnetic phase or optimizing shape and size as well as piezoelectric/magnetostrictive volume ratio. All of these efforts lead to abate the demagnetization field. This paper describes from simulation toward experiment to find out the most effective method for enhancing magnetoelectric effect (ME) in current sensing applications. By using ring-shape magnetoelectric composites, many advantages were found includes: (i) enhance of the magnetic field concentration and (ii) eliminate impact of demagnetization field between magnetic layers thanks to closed magnetic circuit; (iii) easy to tune electromechanical resonances; and (iv) independent of the distance from the current-carrying cable. Indeed, it shows a variable resonant frequency from 20 to kHz 175 kHz depending on the size and structuce. An excellent linearly and an extremely high current sensitivity ~ 10 V/A was achieved in the Metglas/PZT/Metglas penta-layered laminates. Compared with the other close-magnetic-circuit-type current sensor topologies reported, this sensitivity is several hundred times higher. This sensor has great potential for further current sensing applications.Thi Huong Giang Dogiangdth@vnu.edu.vnTrong Vinh NguyenThi Ngoc Khanh VuAnh Tam HoAnh Tuan PhungHuu Duc Nguyenducnh@vnu.edu.vn2018-12-25T03:53:28Z2019-01-07T03:17:51Zhttp://eprints.uet.vnu.edu.vn/eprints/id/eprint/3384This item is in the repository with the URL: http://eprints.uet.vnu.edu.vn/eprints/id/eprint/33842018-12-25T03:53:28ZThiết kế và mô phỏng tính toán cấu hình khuếch đại và tập trung từ thông tích hợp trong các hệ vi từ kế cho các ứng dụng y-sinhCùng với sự phát triển của công nghệ Micro và Nano và sự tiến bộ của khoa học công nghệ trong lĩnh vực vi cảm biến kích thước micro, nhiều ứng dụng trên các sản phẩm này đặc biệt trong khoa học sự sống như y, sinh học và môi trường đã được phát triển mạnh mẽ và đem lại nhiều thành tựu. Trong những năm gần đây, công nghệ vi lưu nhận được sự quan tâm lớn từ phía các nhà khoa học, đặc biệt là từ các quốc gia có nền khoa học chưa thực sự phát triển. Một trong những định hướng nghiên cứu trong nghiên cứu này là hướng đến ứng dụng sản phẩm trong thử nghiệm, đo đạc, xét nghiệm nhanh các thông tin liên quan đến Hemoglobin và các ứng dụng khác liên quan như bệnh sốt rét và phát hiện một số chủng vi khuẩn/vi-rút khác, dựa vào sự thay đổi tính chất từ của chúng trong những điều kiện khác nhau. Đối với các phần tử sinh học không thể hiện rõ tính chất từ, phương án lai hóa các phần tử sinh học sau với các hạt từ có thể dễ dàng được phát hiện bởi các vi cảm biến từ độ nhạy cao là một trong các hướng nghiên cứu trọng tâm của Phòng thí nghiệm Trọng điểm Công nghệ Micro và Nano, Trường ĐH Công nghệ, ĐHQGHN. Theo định hướng nghiên cứu này, việc tìm ra giải pháp giúp tăng cường độ nhạy, độ phân giải của hệ thống cảm biến nhưng đồng thời mang lại hiệu quả kinh tế đã được nhóm nghiên cứu tập trung theo hướng sử dụng các bộ tập trung và khuếch đại từ trường – concentrator được thiết kế tính toán và chế tạo phù hợp tích hợp với vi cảm biến. Báo cáo này sẽ tập trung trình bày các kế quả thiết kế và mô phỏng tính toán cấu hình khuếch đại và tập trung từ thông cho các ứng dụng này. Đây là hướng nghiên cứu có tiềm năng, không chỉ tạo ra các sản phẩm nghiên cứu có chất lượng cao mà còn định hướng ứng dụng cho ra các sản phẩm thương mại trong mục đích y-sinh chuẩn đoán và phát hiện nhanh các bệnh thông qua phương pháp đánh dấu từ.Anh Tam Hohoanhtam@vnu.edu.vn