eprintid: 2367
rev_number: 8
eprint_status: archive
userid: 352
dir: disk0/00/00/23/67
datestamp: 2016-12-31 09:56:50
lastmod: 2016-12-31 09:56:50
status_changed: 2016-12-31 09:56:50
type: conference_item
metadata_visibility: show
creators_name: Phung, Van Ngoc
creators_name: Dang, The Ba
creators_name: Nguyen, Van Duc
creators_id: badt@vnu.edu.vn
title: Modeling an Testing of a Two-buoy Heaving Wave Energy Converter
ispublished: inpress
subjects: Mechanics
abstract: A design of a two-buoy small scale point absorber was built and tested in July 2016 on West Lake. The tests were aimed at performance characterization and validation of a linear dynamics model. The coefficients used in the model are obtained through a combination of bench-top and tank-side experiment. The device produced an average of 40W from waves of 35 cm height and frequencies between 0.6-0.8Hz. The experimental results compare reasonably well with the numerical model. However, there is a significant amount of scatter in the experimental values which was attributed to various sources
date: 2016
date_type: published
full_text_status: public
pres_type: paper
event_title: International Conference on Engineering Mechanics and Automation (ICEMA)
event_location: Hanoi, Vietnam
event_dates: 25-27 July 2016
event_type: conference
refereed: TRUE
funders: VNU
projects: QG14.1
citation:   Phung, Van Ngoc and Dang, The Ba and Nguyen, Van Duc  (2016) Modeling an Testing of a Two-buoy Heaving Wave Energy Converter.  In: International Conference on Engineering Mechanics and Automation (ICEMA), 25-27 July 2016, Hanoi, Vietnam.    (In Press)  
document_url: https://eprints.uet.vnu.edu.vn/eprints/id/eprint/2367/1/Ngoc-%20design%20and%20Testing%20of%20a%20Two%20%28ICEMA2016%29%20%281%29.doc