relation: https://eprints.uet.vnu.edu.vn/eprints/id/eprint/831/
title: Control Circuit Design for Sensing Microgripper
creator: Phan, Huu Phu
creator: Chu, Duc Trinh
subject: Electronics and Communications
subject: Electronics and Computer Engineering
description: This paper presents the design, and simulation a control system for sensing microgripper based on a standard Bi-CMOS process which can be integrated into a singer chip for automatic applications. The controller contains a main feedback loop with sensor buffer, internal temperature compensated reference, internal regulator, logic control and setting level circuits that formed a stand-alone micromanipulation system. Each sub-circuit of the controller was designed to meet strictly specifications and functions through a silicon level simulation tool. This micromanipulation system is wide range of power voltage supply (from 7 up to 30 volts) and the output displacement can be set by two modes, analog signal and 8 bit digital port.
publisher: American Scientific Publishers
date: 2013-03-01
type: Article
type: PeerReviewed
identifier:   Phan, Huu Phu and Chu, Duc Trinh  (2013) Control Circuit Design for Sensing Microgripper.  Advanced Science Letters, 19  (3).   pp. 1001-1006.  ISSN 1936-6612     
relation: http://dx.doi.org/10.1166/asl.2013.4806